Motor Faults Pracbox for assessing and training Induction motors and fault finding
Major problems with induction motors assessment and training
Inconvenient setup
To teach or assess induction motors, you will need at least 5 to 8 motors and if you are teaching fault-finding in these then you'll need at least 10 to 16, if not more. You now have too many equipment but the problem is, you only have one motor at a time, which is not very convenient in teaching a group of 16 students. Mind you, this is a fixed setup, you will have to reserve a room just for this.
Very expensive
Buying so many motors is expensive and even more expensive is the fault-finding setup. Once you make one equipment faulty, there is usually no going back, which means if you want to show multiple faults, you will have to buy more motors.
Not enough testing
The biggest concern most educators and regulators have is the lack of enough testing opportunities for students. This is because you can test an equipment two or three times before it gets unengaging because nothing is changing, so there is no learning.
Most components that you’ll need are in one place so you won’t need to look for them each time you do a prac
Motor Faults Pracbox can help
One equipment, Five motors
One motor faults pracbox provides an opportunity to train and assess in 5 types of motors. This makes it very convenient and since this is a compact box, you can take it to any room. Nothing gets in your way of training your students.
Faults system included
You're not just buying a pracbox with the convenience of 5 motors, but also a fault-finding system built into it. So you're not just limited to teaching about the working of the motors but also how to find faults and without any extra cost.
Students become testing experts
The faults system that is onboard the motor faults pracbox has 30 sets of faults for each - single and three phase motors, making it 60 sets of faults altogether. Your students will get more than 60 opportunities to test the motors with changing faults, which will keep them engaged.
Compliance couldn't be easier
SPECIFICATION
| Parameter | Value | Purpose & Benefit |
|---|---|---|
|
Subjects can you use the Motor Faults Pracbox in |
UEENEEG006A |
The equipment is designed
for the Units of competency to make it easier for you to maintain compliance |
|
Single-phase motor operating voltage |
41.5V |
Extra-low voltage (ELV) so that you can use them safely |
|
Types of Single-phase motors you can cover |
Split Phase |
Four single phase motors in one, which means more convenience, flexibility and cost savings |
|
Capacitor Values |
Start Capacitor: 22uF 100V |
Capacitor testing training and useful in some single phase motors |
|
Cut-off setup |
Toggle switch |
A simple, yet effective way of showing students the effects of the cut-off setup that you can control fully |
|
Three-phase squirrel cage motor operating voltage |
24/41.5V |
Extra-low voltage (ELV) so that you can use them safely. Two voltages to connect it in star or delta configuration |
|
Fault system operating voltage |
5V |
No need for any special setup to assess and train in fault-finding |
|
Fault control access |
Via onboard Touchscreen |
Easy to engage and remove faults |
|
Three-phase faults |
30 sets of faults |
Your students get at least 30 testing oppotunities |
|
Single-phase faults |
30 sets of faults |
Your students get at least 30 testing oppotunities |
|
Number of concurrent faults |
Faults 1 to 10 - Single Fault |
Faults increase in complexity to increase learner engagement. |
What Our Customers Say
